A&D SMARTMETER iBloodPressure 2.0 Instruction Manual page 12

Using the Monitor
Transmitting Temporarily Stored Data
In cases when the network cannot receive measurement data, the
measurement data is temporarily stored in the monitor memory. The
data stored in the memory is transmitted the next time a connection
is successfully made to the network. A total of 5 sets of measurement
data can be stored. When the amount of data exceeds 5 sets, the
oldest data is deleted and the new data is stored.
Time
This monitor has a built-in clock. The date and time a measurement was
taken is included in the measurement data. The built-in clock is designed
to be automatically adjusted by syncing with the cellular network. This
monitor has no clock adjustment function.
Selecting the correct cuff
Using the correct cuff size is important for an accurate reading. If the
cuff is not the proper size, the reading may yield an incorrect blood
pressure value.
The arm size is printed on each cuff.
The index p and proper fit range, on the cuff, tell you if you are applying
the correct cuff. For further information, refer to "Applying The Arm Cuff".
If the index p points outside of the range, contact your local dealer to
purchase a replacement cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Part Number
UA-420
UA-291
Arm size: The circumference at the biceps.
Note: Model UA-651CEL-SM is not designed to use a small cuff.
E-11
Description
Wide Range cuff
Large cuff
Specification
8.6-16.5" (22 to 42cm)
12.2-17.7" (31 to 45cm)