One-Piece Front Turn Signal Lamps - Chevrolet S-10 Owner's Manual

One-Piece Front Turn Signal Lamps

1. Remove the headlamp assembly as shown in
"One-Piece Composite Headlamp System"
under Headlamps on page 5-53.
2. Twist the bulb socket
counterclockwise to
remove it from
the headlamp
assembly.
3. Pull the bulb straigh out to remove it from
the socket.
4. Push the new bulb into the socket until it snaps
into place.
5. Put the bulb socket into the lamp assembly and
twist it clockwise until it is tight.
6. Put the headlamp assembly back into the vehicle.
7. Install the two retaining clips.
8. Close the hood.
5-55