Checking Brake Fluid; What To Add - Chevrolet S-10 Owner's Manual

Checking Brake Fluid

You can check the brake fluid without taking off the cap.
After work is done on the brake hydraulic system, make
sure the level is above the MIN but not over the
MAX mark.
5-40
Just look at the brake fluid
reservoir. The fluid level
should be above MIN. If it
is not, have your brake
system checked to
see if there is a leak.

What to Add

When you do need brake fluid, use only DOT-3 brake
fluid. Use new brake fluid from a sealed container
only. See Part D: Recommended Fluids and Lubricants
on page 6-32.
Always clean the brake fluid reservoir cap and the area
around the cap before removing it. This will help
keep dirt from entering the reservoir.
CAUTION:
{
With the wrong kind of fluid in your brake
system, your brakes may not work well, or
they may not even work at all. This could
cause a crash. Always use the proper brake
fluid.