Huazheng HZ-1025 Manual

Petroleum and synthetic liquid water separability tester

Advertisement

HZ-1025
Petroleum and synthetic liquid
water separability tester
Huazheng Electric Manufacturing (Baoding) Co., Ltd

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HZ-1025 and is the answer not in the manual?

Questions and answers

Summary of Contents for Huazheng HZ-1025

  • Page 1 HZ-1025 Petroleum and synthetic liquid water separability tester Huazheng Electric Manufacturing (Baoding) Co., Ltd...
  • Page 2: Table Of Contents

    Contents I. Overview...........................1 II.Key Function and Feature....................1 III. Major Technical Indicators....................2 IV. Assembly and use.......................2 V. Fault analysis and troubleshooting..................3 VI. Precautions..........................4 VII. Packing List..........................5...
  • Page 3: Overview

    Overview The HZ-1025 petroleum and synthetic liquid water separability tester is designed and manufactured in accordance with the national standard GB/T7305 ASTM D1401. This instrument is suitable for measuring oils with a kinematic viscosity of 28.8~90mm²/s at 40 ℃ . The test temperature is 54 ± 1 ℃ . It can also be used to determine oils with a kinematic viscosity greater than 90mm²/s at 40℃, but the test temperature is 82±1℃.
  • Page 4: Major Technical Indicators

    III. Major Technical Indicators 1. Input power: <830W 2. Heating power: 800W 3. Power supply: AC220V/50Hz 4. Temperature control range: room temperature~85℃ 5. Temperature control accuracy: ±0.2℃ 6. Number of test holes: 3 holes IV. Assembly and use After unpacking the instrument, carefully remove the packaging, and install it as shown in the figure after checking that there is no damage.
  • Page 5: Fault Analysis And Troubleshooting

    Set value change method  Press the key, the upper row displays SP. Press ▲ or ▼ key to make the lower row display the required value. Press again or go to standard mode. Control parameter change method  Press the key for more than 4 seconds, the upper row displays the prompt of the control parameter, and press the ▲...
  • Page 6: Precautions

    light is off Check the circuit for short Poor power connection circuit The power switch is damaged Replace the power switch There is a problem with the Turn on the Replace the stirring switch stirring switch water bath stirring switch, There is a problem with the Replace the mixing motor the motor does...
  • Page 7: Packing List

    Packing List HZ-1025 Petroleum and synthetic liquid Product model water separability tester name GB/T7305 Random files and accessories Specification type Quantity Name Unit Certificate and manual Pieces Host 100ml Measuring cylinder Pieces Test tube fixture light Pieces Test stirring device...

Table of Contents