HP ProBook 445 G9 Maintenance And Service Manual page 77

12. If you need to remove the ambient light sensor board, disconnect the cable from the ZIF connector on
the sensor (1), and then use a tool (2) to release the board from the display (3).
The ambient light sensor is available as spare part number N00883-001.
The ambient light sensor cable is available in the display cable kit as spare part number N01283-001.
13. If you need to remove the display panel/camera cable, peel the cable up off the inside of the display rear
cover.
The display panel/camera cable is available as spare part number N01283-001.
Component replacement procedures 67