RTC battery
To remove the RTC battery, use this procedure and illustration.
Table 6-2
RTC battery description and part number
Description
RTC battery
Before removing the RTC battery, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the RTC battery:
1.
Disconnect the battery cable from the system board (1).
2.
Remove the cable from the clips on the computer chassis (2).
3.
Use a tool to release the battery from the computer (3). The battery is secured with adhesive.
Reverse this procedure to install the RTC battery.
I/O board
To remove the I/O board, use this procedure and illustration.
Table 6-3
I/O board description and part number
Description
I/O board
50
Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
38).
38).
Battery on page
48).
Spare part number
M34737-001
Spare part number
N01502-001