KNX Multi Functional Switch
Settings
Thermostat operation mode
If there is not a restricted for manual control at the system,
Up /
No operation for 10 seconds saves the value and returns to main screen
OK button saves the value and goes to the next setting
Fan level
If there is not a restricted for manual control at the system,
Up /
No operation for 10 seconds saves the value and returns to main screen
OK button saves the value and goes to the next setting
Swing level
If there is not a restricted for manual control at the system,
Up /
Level A means swing auto enabled
No operation for 10 seconds saves the value and returns to main screen
OK button saves the value and goes to the next setting
Version: 1.0
Visual
Down buttons changes thermostat operation mode
Down buttons increase or decreasethe fan level within specific limit
If level is selected as "Auto", the flap icon appears at the main
Down buttons increase or decreasethe flap position within Level 0 – Level 5
The mode border flashes
The fan icon flashes
The flap icon flashes
screen
Table 9
Jan-20
Page 12/20