Kenmore 795.75192401 Service Manual page 25

https://appliancetechmanuals.com
8-1-13 Automatic Diagnosis Function
1. Automatic diagnosis makes servicing the refrigerator easy.
2. When an error occurs, the buttons will not operate; but the tones. such as ding. will sound.
3. When the error CODE removes the sign, it returns to normal operation (RESET).
4. The error CODE shows on the Refrigerator and Freezer Display.
ERROR CODE on display panel
NO ITEM
1 Freezer sensor
Refrigerator
2
sensor
3 Defrost sensor
Room
4 Temperature
sensor
5 Defrost mode
BLDC Fan Motor
6 at Freezing
Compartment.
✽ LED check function: If simultaneously pressing express freezer button and freezing temperature adjustment
ERROR CODE
Er FS
Er rS
Er dS
Wher Display check mode
Er rt
Er dH
Er FF
button for a second, display LED graphics on. If releasing the button, the LED graphic
displays the previous status.
POSSIBLE PROBLEMS
Cut or short circuit wire
Cut or short circuit wire
Cut or short circuit wire
Cut or short circuit wire
When defrost sensor
doesn't reach 46°F(8°C)
within 1 hours after starting
defrost.
If there is no fan motor
signal for more than 65sec
in operation fan motor
- 25 -
REMARKS
Inspect Connecting wires
on each sensor
Snapping of defrost heater
or Temperature fuse, pull-
out of connector (indicated
minimum 1 hours after
failure occurs)
Poor motor, hooking to
wires of fan, contact of
structures to fan, snapping
or short circuit of Lead wires