Type-C Connector Cn5302 - HP Z27xs G3 Maintenance And Service Manual

TYPE-C connector CN5302

Repair the Type-C connector:
1) Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber.
You can gently push down with the soldering iron once everything is molten to move the M1
out of the through holes.
2) Use a hot air gun to melt the solder on the pins.
3) Lift the CN5302 connector from the circuit board.
4) Place the new component on the circuit board. Be sure that it matches the circuit board
footprint.
5) Solder the new component.
20