Advertisement
4. Attach Power Head to Tank, making
sure Tabs lock into place.
Note: The Power Head must properly
seal onto Tank and must be undamaged
to allow vacuum to create suction.
5. Insert end of Hose with clip securely
into Vacuum Port. Press button on hose
until Clip locks into tab on port.
Tab
Clip
6. If desired, slide Nozzle onto Hose.
7. Make sure that Switch is in its off position.
Insert a fully charged battery and make
sure that it clicks into place securely.
Page 6
For technical questions, please call 1-888-866-5797.
8. Hold the loose Hose end securely. Turn
Switch on to operate Vacuum.
9. WHEN WET VACUUMING:
IMPORTANT! Leave a gap at tip of nozzle opening
to allow air inflow.
Do not immerse nozzle completely in liquid.
When the Motor sound becomes
higher in pitch, the Tank is full and
the float is closing off the motor intake.
IMMEDIATELY:
a. DRY YOUR HANDS AND FEET
b. turn the Vacuum off
c. disconnect battery pack from unit
d. empty the Tank.
WARNING! TO PREVENT SERIOUS INJURY
FROM ELECTRIC SHOCK:
Dry your hands and feet before touching battery
pack or switch.
Do not continue to use the vacuum
when the tank is full of liquid.
10. To prevent accidents,
DRY YOUR HANDS AND FEET,
turn off the appliance and disconnect battery pack
after use.
Empty and clean Tank, dry Tank,
clean Filter (see Cleaning Filter on page 9),
then store the appliance indoors
out of children's reach.
Item 58310
Advertisement
