Advertisement
Blower Operation
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Switch off and remove battery pack before removing the Power Head.
1. Pull Tabs outward and remove Power Head
by the handle. Pull up to remove it.
2. Clean Tank out before using the appliance as
a Blower. CAUTION! Any material left in the
Tank may be blown out, causing injury.
3. Attach Power Head to Tank, making
sure Tabs lock into place.
4. Remove Hose from the Vacuum Port. Locate
Blower Port opening at the rear of Power
Head. Insert end of the Hose with Clip
into the Blower Port. Press the button on
the Hose until the clip locks into tab.
Blower Port
Item 58310
For technical questions, please call 1-888-866-5797.
5. CAUTION! Wear ANSI-approved
safety goggles before use.
6. Make sure that Switch is in its off position.
Insert a fully charged battery and make
sure that it clicks into place securely.
7. Hold the loose Hose end securely.
Turn the Switch on to operate the Blower.
CAUTION! Do not point Hose toward
another person or animal.
8. To prevent accidents, turn off the appliance and
disconnect battery pack after use. Clean, then
store the appliance indoors out of children's reach.
Page 7
Advertisement
