Table of Contents
Advertisement
Cause
Corrective measure
– Option 2: Clean the filter
– Option 3: Check the filter
A fleece dust bag is being
Use a waste disposal dust
used.
bag.
The extraction hose is
Remove the blockage or un-
blocked or twisted.
twist the hose.
The dust extractor's dust
Empty the dust extractor's
container is full.
dust container.
Maintenance and Service
Maintenance and Cleaning
Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
Changing the Connection Hose (see figure H)
To remove the connection hose (19), loosen the screw on
the hose clamp (23) with a screwdriver and lift the hose
clamp (23) off with the connection hose (19). Remove the
hose clamp (23). Pull out the inner housing (24) of the hose
mount (25) at the other end of the connection hose (19).
Hold the inner housing (24) in place and unscrew the con-
nection hose (19).
To insert a new connection hose (19), hold the inner hous-
ing (24) in place and screw in the new connection hose (19)
all the way. Fit the hose clamp (23) on the other side of the
connection hose (19). Position the screw head so that you
can tighten the hose clamp (23) effortlessly on the sanding
head (11) with a screwdriver with a torque of around 2 Nm.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Bosch Power Tools
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
element mechanically (ex-
Broadwater Park
traction).
North Orbital Road
Denham Uxbridge
element for damage and
UB 9 5HJ
blockages. Insert a new
At www.bosch-pt.co.uk you can order spare parts or arrange
filter element regularly.
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113), power tools that are no longer
usable must be collected separately and disposed of in an
environmentally friendly manner.
Français
Consignes de sécurité
Avertissements de sécurité généraux pour l'outil
électrique
MENT
avec cet outil électrique. Ne pas suivre les instructions
énumérées ci-dessous peut provoquer un choc électrique,
un incendie et/ou une blessure sérieuse.
Conserver tous les avertissements et toutes les instruc-
tions pour pouvoir s'y reporter ultérieurement.
Do not dispose of power tools along with
household waste.
Lire tous les avertissements de sé-
AVERTISSE-
curité, les instructions, les illustra-
tions et les spécifications fournis
1 609 92A 7KA | (28.03.2022)
Français | 19
Advertisement
Table of Contents
