List Of Constants Predefined - Citizen CT-D101 Series Programming Manual

2019/12/24 13:26:33
-------------------------------------------------------
2019/12/24 13:26:33.706 8028 008 METHOD result DisplayTextAsync() -> Success(0)
* When this SDK works with logging, it performs uncomfortably because a log file will be updated
at every method and accessing properties .
* Because of the following reasons or else, log data will not be stored without any notification .
- A folder where is not under the local folder is specified.
- A folder or file without permission is specified.
- Write-protected log file is already existing.
- Another program (such as a text editor) is using (locking) the log file.
- There is not enough space to store log data in the device.

3.4.2. List of Constants Predefined

No Type
1 Result/Error
2 Interface to
connect
Area to clear
3
4 Display mode
Cursor type
5
Name
CDP_SUCCESS
CDP_E_CONNECTED
CDP_E_DISCONNECT
CDP_E_NOTCONNECT
CDP_E_CONNECT_OFFLINE
CDP_E_ILLEGAL
CDP_E_OFFLINE
CDP_E_FAILURE
CDP_PORT_WiFi
CMP_PORT_Bluetooth
CDP_AREA_ALL
CDP_AREA_CURSORLINE
CDP_OVERWRITE
CDP_VERTICALSCROLL
CDP_HORIZONTALSCROLL
CDP_TYPE_NONE
CDP_TYPE_UNDERLINE
CITIZEN UWP POS Print SDK - Programming Manual
Data
Value
type
int 0 Successfully completed
int 1001 Already connected
int 1002 Not connected
int 1003 Failed to connect
int 1005 Failed printer status
int 1101 Unsupported or invalid parameter
int 1102 Off-line
int 1104 Process failure
int 0 Network
int 1 Bluetooth
int 0
int 1
int 1 Overwrite mode
int 2 Vertical scroll mode
int 3 Horizontal scroll mode
int 0 Hide cursor
int 1 Display cursor
100
Description
Entire area
Cursor line