Table of Contents
Advertisement
To change the cycle during operation
1. Press START/PAUSE to stop operations temporarily.
2. Select a different cycle.
3. Press and hold START/PAUSE again to start the new cycle.
WARNING
• Do not put anything on top of your washer while it is running.
• While the lower washer is operating, the protective cover may have wet steam due to
the temperature difference between the upper and lower parts of the washer.
FlexWash_WV9900M_DC68-03768A-07_EN.indd 51
CAUTION
When using the upper washer, you may
not see all the remaining clothes after a
cycle is finished, especially those in the
front area of the tub.
When the cycle is complete, turn the tub
manually to check if there are any clothes
remaining in the tub.
CAUTION
When using the upper washer, do not
use a laundry net featuring a protective
plastic rim. Otherwise, the net may cause a
system failure.
English 51
2019-05-23 PM 2:55:25
Advertisement
Table of Contents
