Table of Contents
Advertisement
Installation
Follow these instructions carefully to ensure proper installation of the washer and to
prevent accidents when doing laundry.
WARNING
Certain internal parts are intentionally not grounded and may present a risk electric shock
only during servicing. Service personnel – Do not contact the following parts while the
appliance is energized: Control board, heat sink, motor, inlet valve and pump.
Unpacking your washer
Unpack your washer and inspect it for shipping damage. Make sure you have received all
the items shown below. If your washer was damaged during shipping, or you do not have
all of the items, contact 1-800-SAMSUNG (1-800-726-7864). To prevent personal injury or
strain, wear protective gloves whenever lifting or carrying the unit.
WARNING
Packing materials can be dangerous to children; Keep all packing material (plastic bags,
polystyrene, etc.) well out of children's reach.
18
English
FlexWash_WV9900M_DC68-03768A-07_EN.indd 18
CAUTION
When unpacking the washer, a 2 person
collaboration is needed. To remove the
cushion bottom of the packing materials,
do not tip the washer over on its front.
When you lay the washer down to remove
the carton base, protect the sides of the
washer and lay it down carefully. Never
lay your washer on its back or front.
CAUTION
Do not yank out or remove the sealing
of the inner door. This may cause a leak
during the washing process.
2019-05-23 PM 2:55:15
Advertisement
Table of Contents
