Table of Contents
Advertisement
• Image Appearance
This provides access to the advanced image settings for the network camera.
– Brightness: The image's brightness can be adjusted in the range 1 ~ 10, where a higher
value produces a brighter image.
– Contrast: Adjust the image's contrast by raising or lowering the value in this field in the
range 1 ~ 10.
– Saturation: Set an appropriate value in the range 1 ~ 10. Lower values mean less color
saturation.
– Hue: Set an appropriate value in the range 1 ~ 10. The value distinguishes color, such as
red, yellow, green, or violet.
– White Balance Mode: Select white balance mode which fits camera installation
environment. In case of Manual mode, user can set R, G, B gain manually.
• Enhance Control
– Enable wide dynamic range: Activates WDR which cannot be used with Defog function.
If WDR is activated, shutter mode becomes automatic mode only.
– Enable flip horizontal: Check this box to flip the image.
– Enable noise reduction: Check this box to activate the noise reduction.
Once enabled, you can select noise reduction level.
– Enable defog: Check this box to activate the defog function.
– Metering Mode: Users can change the metering mode.
This is method of measuring the intensity of the light hitting and reflected by a subject in
order to determine the exposure required.
34
Advertisement
Table of Contents
