Presentations And Multimedia; Changing Display Settings; Using The Nfc Connection - Lenovo 20AQ User Manual

• Strong signal
Using the Bluetooth connection
Bluetooth can connect devices a short distance from one another, and is commonly used for connecting
peripheral devices to a computer, transferring data between hand-held devices and a personal computer, or
remotely controlling and communicating with devices such as mobile phones.
Depending on the model, your computer might support the Bluetooth feature. To transfer data through
the Bluetooth feature, do the following:
1. Ensure that the Bluetooth feature is enabled. If you are using the Windows 8 operating system, the
integrated Bluetooth feature is enabled by default. If you are using the Windows 7 operating system, to
enable the Bluetooth feature, press F8 then follow the instructions on the screen.
2. Right-click the data that you want to send.
3. Select Send To ➙ Bluetooth Devices.
4. Select a Bluetooth device, and then follow the instructions on the screen.
Note: If you use the wireless feature (the 802.11 standards) of your computer simultaneously with a
Bluetooth option, the data transmission speed can be delayed and the performance of the wireless feature
can be degraded.
For more information, refer to the Windows help information system and the Bluetooth help information
system.

Using the NFC connection

NFC is a high-frequency and short-range wireless communications technology. Depending on the
model, your computer comes with an NFC card. By using the NFC feature, you can establish the radio
communications between the your computer and another NFC-enabled device over a distance no more
than a few centimeters.
Before you use the NFC feature, ensure that the NFC feature is enabled. To enable the NFC feature on
the Windows 8 operating system, do the following:
1. From the Start screen, tap Lenovo Settings ➙ Mobile Hotspot.
2. In the Enable NFC area, slide to the right to enable the NFC feature.
You can use the NFC feature with NFC supported programs, such as the Lenovo QuickDisplay program,
the Lenovo QuickControl program, or the Lenovo QuickCast program.

Presentations and multimedia

You can connect your computer to a projector to give presentations or you can connect your computer
to an external monitor to expand your workspace.

Changing display settings

You can change the display settings, such as the display resolution, font size, and so on.
To change the display settings, do the following:
1. Open Control Panel and click Appearance and Personalization.
2. Click Display for further configuration.
3. Click Apply. The change will take effect after you log off.
.
Chapter 2 Using your computer
35