Download Print this page
MadgeTech Shock101-EB Product User Manual

MadgeTech Shock101-EB Product User Manual

Advertisement

Quick Links

Description
Channels
Acceleration Range
Acceleration Resolution
Calibrated Accuracy
Sample Rate
Reading Rate
Memory
Required Interface Package
Baud Rate
Typical Battery Life
Operating Environment
-20 °C to +54 °C, 0 to 95%RH (non-condensing)
Material
Dimensions
5.5 in x 5.2 in x 3.2 in (140 mm x 132 mm x 80 mm)
Weight
Approvals
*Shock101-EB Acceleration Range, Resolution and Accuracy
Range (g)
+5
Accuracy (g)
+0.2
Resolution (g)
0.01
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 54 °C (129 °F).
1.888.610.7664
Shock101-EB
Shock (3 axes)
*See Table Below
512 Hz
64 Hz up to 5 minutes
349,525/axis
IFC200
115,200
60 days
Anodized aluminum
5 lb (2.3 kg)
CE
+50
+100
+250
+1
+2
+4
0.05
0.1
0.2
DOC-1064035-00 REV 11 2014.07.07
www.calcert.com
10
15
20
5
25
0
30
Product User Guide
Shock101-EB-5
Tri-axial +5G, Shock Data Logger with Extended Battery Life
Shock101-EB-50
Tri-axial +50G, Shock Data Logger with Extended Battery Life
Shock101-EB-100
Tri-axial +100G, Shock Data Logger with Extended Battery Life
Shock101-EB-250
Tri-axial +250G, Shock Data Logger with Extended Battery Life
sales@calcert.com
Shock101-EB

Advertisement

loading

Summary of Contents for MadgeTech Shock101-EB

  • Page 1 Material Anodized aluminum Dimensions 5.5 in x 5.2 in x 3.2 in (140 mm x 132 mm x 80 mm) Weight 5 lb (2.3 kg) Approvals *Shock101-EB Acceleration Range, Resolution and Accuracy Range (g) +100 +250 Accuracy (g) +0.2 Shock101-EB-5...
  • Page 2 Insert the device into a USB port. The drivers will install automatically. Note: Be sure not to over tighten the screws or strip the threads. Recalibration The Shock101-EB standard calibration is performed at 0 g for the x-axis, 0 g for the y-axis and 1 g for the z-axis. Device Operation Connecting and Starting the data logger - Once the software is installed and running, plug the interface cable into the data logger.

This manual is also suitable for:

Shock101-eb-5Shock101-eb-50Shock101-eb-100Shock101-eb-250