Advertisement
Assembly - Assembling the Fan without the Light Kit
1
Assembling the fan without light kit
□
In order to use the fan without the light kit, remove the,
switch cap from the top of the light kit fitter assembly (E).
□
Press the plastic plug (PP) (provided) into the center hole of
the switch cap.
□
Remove and save three light kit mounting screws (QQ) on the
switch cup.
□
Slide the switch cup into the switch housing and reinstall the
three light kit mounting screws (QQ).
Operation
Turn on the power and check the operation of the fan. The pull chain
controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - Off
The appropriate speed setting for warm or cool weather depends on
factors such as the room size, ceiling height, and number of fans.
The slide switch (XX) controls the direction of the blades: forward
(switch left) or reverse (switch right)
NOTE: Wait for the fan to stop before reversing the direction of the
blade rotation.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a cooler setting
without affecting your comfort.
E
xx
xx
11
Please contact 1-855-HD-HAMPTON for further assistance.
QQ
PP
HAMPTONBAY.COM
Advertisement
