Advertisement
Assembly - Hanging the Fan (continued)
4
Securing the fan to the
motor bracket
□
Once the wiring is complete, lift the motor bracket on the
top of the fan-motor assembly (B) so that the four captive
screws (DD) in the motor bracket align with the four screw
holes (II) in the mounting plate (A).
□
Securely tighten all four screws (DD).
5
Attaching the motor housing
□
Remove the two screws (YY) on two diagonal sides from
the top of the mounting plate (A) and loosen the other two
screws (XX).
□
Align the two key slots on the top of the motor housing (C)
with the two screws on the mounting plate (A). Push the
motor housing (C) up and turn it clockwise to lock in the
mounting plate (A). Tighten the two screws (XX).
□
Install the two screws (YY) that were removed at the
beginning of this step into the remaining two holes and
tighten the four screws firmly.
A
□
Install the decorative canopy ring (D) by aligning the ring's
DD
slots with the screws in the canopy (C). Rotate the ring
clockwise to lock in place.
B
8
XX
YY
B
C
C
B
D
Advertisement
