Pick Mode; Multiple Label Reading - Datalogic Gryphon I GD441 Series Quick Reference Manual

General purpose corded handheld area imager bar code reader

Table of Contents

Pick Mode

Specifies the ability of the reader to decode labels only when

they are close to the center of the aiming pattern. Pick Mode

is a Decoding and Transmission process where bar codes that

are not within the configurable distance from the center of the

aiming pattern are not acknowledged or transmitted to the

host. It is active only while the scanner is in Trigger Single

mode. If the scanner switches to a different Read Mode, Pick

Mode is automatically disabled.

The reader offers a number of options for multiple label read-

ing. See the PRG or software configuration tool for descrip-

tions of these features and programming labels.

This feature is not compatible with Multiple Labels

Reading in a Volume. See the PRG for more infor-

mation.

ENTER/EXIT PROGRAMMING MODE

PIck Mode = Disable

Pick Mode = Enable

Operating Modes

Gryphon™ I GD44XX

Table of Contents