After the recording has been set to "EVENT RECORDING," go to "MOTION DETECT" to set
the motion detection for every camera. In this step, the "COPY" option is available only for
analog cameras, IP cameras need to be configured individually.
Motion Detection
Setup
Motion Area
The grid indicates
the area where
Motion Sensitivity
The number of bright
motion will be
green squares
detected
indicates the
sensitivity level (in
this photo, the
sensitivity is set to 3)
www.hikvision.com/en/us
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com