ELGO Electronic EMSC2 Series Operating Manual page 15

7.2.2 Mounting Tolerances
The tolerances apply equally to both mounting variants resp. regardless of whether the sensor is mounted hori-
zontally (standard) or vertically (option L).
Table 1: Mounting tolerances
Tolerances
Sensor distance to the tape
Pitch (longitudinal)
Pitch (lateral)
Yaw angle
Offset (lateral)
Sensor distance
Pitch (longitudinal)
Yaw angle
±0.5 °
Figure 6: Mounting Tolerances
EMSC: 0.1 ... max. 0.8 mm
LMSC: 0.1 ... max. 2.0 mm
The maximum sensor distance must not be exceeded at any position
±0.5°
±0.5°
± 2.5 mm
EMSC = 0.1... 0.8 mm
LMSC = 0.1... 2.0 mm
EMSC = max. 0.8 mm
LMSC = max. 2.0 mm
Pitch (lateral)
Offset (lateral)
D
±2.5 mm
- 15 -
Installation and First Start-Up