Inlink (Cec-Compatible) Device - Insignia NS-32D311MX17 User Manual

Problem Solution
After Auto
• Reception can vary by channel
Channel
depending on the broadcast power
Search, there
level of a given station. Contact your
are no
cable or satellite TV provider.
channels.
• Make sure that the antenna or
cable/satellite TV is connected
securely to your TV.
• Try replacing the cable between the
antenna/cable or cable/satellite box
and your TV.
When I press
• Turn on the device. Your TV
INPUT, I
automatically detects and displays
cannot select
which video jacks have devices
my device (it is
connected to them when the devices
grayed out).
are turned on.
• Turn off Auto Input Sensing. See
Turning Input Sensor on or off
page 59.
One or more
• Make sure that the channels are not
channels do
blocked. See
not display.
levels
• Make sure that the channels are not
hidden. The channel may have been
deleted from the channel list. You can
tune to the channel by pressing the
number buttons or you can add the
channel back to the channel list. See
Hiding channels
• If you are using a cable or satellite
box, use the remote that came with
that box to change channels.
• Press INPUT and make sure that you
have selected the correct input for the
device or service you are trying to use.
• If you are using an antenna, the digital
channel signal may be low. To check
the digital channel signal strength,
see
strength
Password is
• Enter 9999 to access parental
lost.
controls, then set a new password.
See
on page 50.
Some settings
• If a setting is grayed, the setting is not
cannot be
available in the current video input
accessed.
mode (for example TV mode). Change
to a different video input source. See
Selecting the video input source
page 33.
TV cabinet
• When the TV is in use, the
creaks.
temperature rises naturally and may
cause the cabinet to expand or
contract which can cause a creaking
noise. This is not a malfunction.
68
Setting parental control
on page 52.
on page 48.
Checking the digital signal
on page 50.
Setting or changing the password
www.insigniaproducts.com
Problem
/INPUT
button does
not work.
TV keeps
turning off.
A retail
banner is
displayed.
on

INlink (CEC-compatible) device

Problem
My TV is not
displaying the
video from
the connected
CEC device.
on
NS-32D311NA17 / NS-32D311MX17
Solution
• Make sure that the Button Lock
option is set to Off. See
power button on your TV
• Unplug the power cord, wait a few
seconds, then plug the cord back in
and turn on your TV.
• Make sure that the sleep timer is not
turned on. See Setting the sleep timer
on page 58.
• You selected Store Display Mode
when you ran the Easy Setup wizard.
Run the Easy Setup wizard and select
Home User Mode on the Viewing
Environment screen. See
TV settings on page 63.
Solution
• Make sure that the HDMI cable is
connected securely to your TV and
the device.
• Make sure that the device is
connected to your TV with an HDMI
cable.
• Make sure that the device is a CEC
device. See the documentation that
came with the device for more
information.
• Press INPUT and make sure that the
correct video input source is selected.
See Selecting the video input source
on page 33.
• Make sure that the INlink feature is
turned on. See Turning INlink on or off
on page 36.
• Try adjusting the TV picture. See
Adjusting the TV picture
Locking the
on page 54.
Customizing
on page 42.