Insignia NS-32D311NA17 Quick Setup Manual

INCLUDED ACCESSORIES

Remote control and
two AAA batteries
A
A
TV stands

FEATURES

ST4 screws (15 mm length) (4 pcs.)

FIND YOUR USER GUIDE ONLINE!

Go to www.insigniaproducts.com, then
click Support & Service.
Enter NS-32D311NA17 in the box
under Manual, Firmware, Drivers & Product
Information, then click ►.

STOP

Do not plug your power cord in until all
other devices have been connected.
Before using your new product, please read these
instructions to prevent any damage.

START HERE

1
How do I attach the stand to my TV? (not for wall mounting)
You'll need: Soft surface and Phillips screwdriver
B Align the screw holes on the TV stands with the holes on the
Place your TV face-down on a cushioned,
bottom of your TV, then secure each stand to your TV with two
clean surface.
of the provided screws.
B
Remote control sensor
Power indicator
Note: Images do not necessarily
represent the exact design of
your television.
ST4 screws (15 mm length)

MAKING CONNECTIONS

2
How do I watch TV (cable, satellite, or antenna) or connect a device, such as a DVD or Blu-ray disc player, game console, or tablet?
WHICH CABLES
DO YOU HAVE?
HDMI
(BEST)
Best video quality
AV
(GOOD)
COAXIAL
(GOOD)
Quick Setup Guide |
32" 720p 60Hz • LED TV

WALL MOUNT

How do I prepare my TV for wall mounting?
(not for use with a TV stand)
You'll need: Soft surface and Phillips screwdriver
OR
A Carefully place your TV face-down on a cushioned, clean surface.
B See the instructions that came with your wall mount for more information
about how to correctly mount your TV.
A
B
Your TV has four VESA mounting holes on the back. If you attach a wall-mount
bracket to the back of your TV, the bracket must be securely attached, using
all four holes. If you do not use all four mounting holes, your TV may fall and
cause property damage or personal injury. See the documentation that came
with your wall-mount for complete mounting instructions.
Multi-purpose jacks: You can plug any device that uses HDMI into either HDMI jack.
However, certain devices must be connected to the HDMI 1 (ARC) jack. See the
instructions that came with your ARC device for more information.
NS-32D311NA17
AUDIO/VIDEO OUT
CABLE