General Operation - Jensen JDM118BT Installation & Owner's Manual

Am/fm receiver with bluetooth and fixed face
Hide thumbs Also See for JDM118BT:
Table of Contents

Advertisement

JDM118BT
OPERATION
General Operation
Press the
button to turn the unit on. Press
again to
Power On/Off
turn the unit off.
Press MODE to select between Radio, USB, Auxiliary Input
Changing Modes
and Bluetooth. Modes of operation are shown in the display.
Volume
Adjust volume using the volume knob (00-43).
Press to silence the audio. Press again to resume listening
Mute
at the previously selected volume.
Insert a 3.5mm cable in the unit's front AUX port.
Auxiliary Inputs
Reset
Press the RESET button to reset the unit back to the factory
settings if abnormal operation occurs. The reset button is
located on the front panel.
Setting the Clock
With the unit on, press DISP to display clock time. Press and
hold DISP until the hours begins to flash, then release.
nn
ll
Press the TUNE
and TUNE 
to adjust the hours,
then press the DISP, the minutes begins to flash, press the
nn
ll
TUNE
and TUNE 
button to adjust the minutes.
Press DISP momentarily to save the selected time.
Display
Press DISP to toggle display between various displayed
information.
Audio / Menu
Press the volume knob momentarily to select between audio
functions.
Press and hold the volume knob for more than two seconds
to select between the menu functions.
Rotate the volume knob left/right to adjust or activate the
desired function/audio.
5

Advertisement

Table of Contents
loading

Table of Contents