General Operation - Jensen MPR319 Installation & Owner's Manual

Am/fm receiver with bluetooth and fixed face
Table of Contents

Advertisement

MPR319
OPERATION
General Operation
Press the
button to turn the unit on. Press
again to
Power On/Off
turn the unit off.
Changing Modes
Press MODE to select between Radio, USB, Auxiliary Input
and Bluetooth. Modes of operation are shown in the display.
Volume
Adjust volume using the volume knob (00-40).
Press to silence the audio. Press again to resume listening
Mute
at the previously selected volume.
Insert a 3.5mm cable in the unit's front AUX port.
Auxiliary Inputs
Reset
Press the RESET button to reset the unit back to the factory
settings if abnormal operation occurs. The reset button is
located on the front panel.
Setting the Clock
With the unit on, press DISP to display clock time. Press and
hold DISP until the hours or minutes begin to flash, then
release. Rotate the volume knob to adjust the time.
Display
Press DISP to toggle display between various displayed
information.
Press the volume knob momentarily to select between audio
Audio / Menu
functions.
Press and hold the volume knob for more than two seconds
to select between the menu functions.
Rotate the volume knob left/right to adjust or activate the
desired function/audio.
5

Advertisement

Table of Contents
loading

Table of Contents