General Operation - Jensen MPR420 Installation & Owner's Manual

MPR420
OPERATION
Power On/Off
Changing Modes
Auxiliary Inputs
Setting the Clock
Audio / Menu
6

General Operation

Press the
turn the unit off.
Press MODE to select between Radio, USB, Auxiliary Input
and Bluetooth. Modes of operation are shown in the display.
Adjust volume using the volume knob (00-40).
Volume
Press to silence the audio. Press again to resume listening
Mute
at the previously selected volume.
Insert a 3.5mm cable in the unit's front AUX port.
Press the RESET button to reset the unit back to the factory
Reset
settings if abnormal operation occurs. The reset button is
located on the front panel.
With the unit on, press DISP to display clock time. Press and
hold DISP until the hours begins to flash, then release.
Turn the volume knob to adjust the hours, then press the
DISP, the minutes begins to flash, Turn the volume knob to
adjust the minutes.
Press DISP momentarily to save the selected time.
Press DISP to toggle display between various displayed
information.
Display
Press the volume knob momentarily to select between audio
functions.
Press and hold the volume knob for more than two seconds
to select between the menu functions.
Rotate the volume knob left/right to adjust or activate the
desired function/audio.
button to turn the unit on. Press again to