Remote Control
Volume (+/-)
BAND/ESC
Thumb pad
SRC
MUTE
Basic operation
Resetting the microprocessor
CAUTION
• Pressing the RESET button resets settings and recorded contents to the factory settings.
– Do not perform this operation when a device is connected to this product.
– Some of the settings and recorded contents will not be reset.
• The microprocessor must be reset under the following conditions:
– Prior to using this product for the first time after installation.
– If this product fails to operate properly.
– If there appears to be problems with the operation of the system.
1
Turn the ignition switch OFF.
Press to select the tuner band when tuner is selected as a source.
Press to switch between media file types when playing the following types of data:
Disc, USB
Use to select a menu on the DVD menu.
Press to answer a call.
Press to cycle through all the available sources.
Press and hold to turn the source off.
Press to end a call.
- 8 -