Table of Contents
Advertisement
Basic operation
Checking part names and
functions
1
2
3
4
5
6
7
1
LCD screen
Resetting the microprocessor on page 4
2
RESET
button
3
Volume (+/–) button
4
Press to switch the mute setting to on or off.
MUTE
button
5
Press to switch the display between the top
button
menu screen and the current source screen.
6
DISP
Press to turn the display on or off.
button
7
Track (
Performs manual seek tuning, fast forwards,
/
reverse and track search controls.
) button
Press to answer or end a call.
Remote control
The remote control CD-R33 is sold separately.
For details concerning operations, see the remote control
manual.
Plugging and unplugging a USB
storage device
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
1
2
1 USB cable
2 USB storage device
Check that no data is being accessed before pulling out the
USB storage device.
On first-time startup
1 Start the engine to boot up the system.
After a short pause, the splash screen comes on for a few
seconds.
The "Select Program Language" screen appears.
p From the second time on, the screen shown will differ
depending on the previous conditions.
2 Touch the language that you want to use on
screen.
3 Touch
.
The top menu screen appears.
5
Advertisement
Table of Contents
