Pioneer DIVX AVH-G219BT Manual page 33

Menu Item
[Ground]
[Steering Wheel Control]
Menu Item
[Steering Wheel Control]
[With Adapter] [No
Adapter]
[Restore Settings]
Menu Item
[Restore Settings]
[Beep Tone]
Menu Item
[Beep Tone]
[On] [Off]
Description
The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].
Description
Select [With Adapter] or [No Adapter] according to your
wired remote control.
NOTES
• This setting is available only when you stop your vehicle in a safe
place and apply the handbrake.
• Depending on your vehicle, this function may not work properly.
In this case, contact your dealer or an authorised PIONEER
Service Station.
• Please use a PIONEER wiring harness for each car model when
[With Adapter] mode is engaged, otherwise select [No Adapter].
Description
Touch [Restore] to restore the settings to the default
settings.
CAUTION
Do not turn off the engine while restoring the settings.
NOTES
• This setting is available only when you stop your vehicle in a safe
place and apply the handbrake.
• The source is turned off and the Bluetooth connection is
disconnected before the process starts (AVH-G219BT).
Description
Select [Off] to disable the beep sound when the button is
pressed or the screen is touched.
- 33 -