Pioneer DIVX AVH-G219BT Manual page 14

Menu Item
[Connection]
[Auto Connect]
[On] [Off]
[Visibility]
[On] [Off]
[PIN Code Input]
[Device Information]
[Bluetooth Memory Clear]
Switching the connected Bluetooth device
You can switch among the connected Bluetooth devices using the switch devices key in
the Bluetooth menu.
• You can register up to three Bluetooth devices on this product (page 13).
• The Bluetooth audio player can be switched to other Bluetooth devices on the
Bluetooth audio playback screen.
• Only one device can be connected as a hands-free phoning.
• The hands-free phoning is also switched when the connected device via Bluetooth is
switched.
Description
Connect, disconnect, or delete registered Bluetooth device
manually.
Touch to delete registered device.
To connect a registered Bluetooth device manually, touch
the name of the device.
To disconnect the device, touch the name of the connected
device in the list.
NOTE
Connect the Bluetooth device manually in the following cases:
• Two or more Bluetooth devices are registered, and you want to
manually select the device to be used.
• You want to reconnect a disconnected Bluetooth device.
• Connection cannot be established automatically for some reason.
Select [On] to connect the last connected Bluetooth device
automatically.
NOTE
If two Bluetooth devices were connected the last time, the two
devices are connected to this product automatically in the order
that they are registered in the device list.
Select [On] to make this product visible to the other device.
Change the PIN code for Bluetooth connection.
The default PIN code is "0000".
1
Touch [0] to [9] to input the pin code (up to 8 digits).
2
Touch .
Displaying the device name and address of this product.
Touch [Clear] then [OK] to clear the Bluetooth memory.
- 14 -