View Alarm Status - TechVision NS16P2P8 Manual

Alarm Management

9.7 View Alarm Status

Click StartSettingsAlarmAlarm Status or click
live preview interface to view the alarm status.
Click "Clear" to stop the buzzer when the buzzer alarm happens. Click
information as shown below.
If the exception information is more than one page, you can enter the number in the box and
then click
information in the previous/next page. Click
to jump to the specified page. Click
on the tool bar at the bottom of the
/ to view the exception alarm
to play the alarm record.
88
NVR User Manual
to view the detail