TechVision NS16P2P8 Manual page 23

Wizard & Main Interface
Note:

If you use the NVR with the PoE network ports, the online state of the internal Ethernet
port will be shown on the interface. Refer to the picture below. Please refer to 11.1.1 TCP/IP
Configuration for detail introduction of the internal Ethernet port.

If the NVR has two network ports or above, you can select the network work pattern as
required. Network Fault Tolerance and Multiple Address Setting are available. Refer to the
pictures below. Please refer to 11.1.1 TCP/IP Configuration for more detailed information.
17
NVR User Manual