Cleaning The Oven Interior With Self Clean; Preparing For The Self Clean Program - Miele H6880BP2 Operating And Installation Instructions

Cleaning the oven interior with
Self Clean 
Instead of cleaning the oven by hand,
you can use the Self Clean 
program.
Any grime that has accumulated will be
broken down and burnt to ash as a
result of the high temperatures.
This oven has three Self Clean levels,
each with a different duration:
– Level 1 for light soiling
– Level 2 for heavier soiling
– Level 3 for very heavy soiling
Once the Self Clean program has
started, the door will lock automatically.
It cannot be opened again until the
program has ended.
You can also set a delayed start time for
the Self Clean program, in order to take
advantage of off-peak electricity rates,
for example.
At the end of the Self Clean program,
any remaining residues (e.g., ash) can
be easily wiped away.
You can only clean one of the two
oven interiors at a time using the Self
Clean function. Self Clean can only be
started if there is no cooking program
in process in the other oven. It is also
not possible to select an operating
mode and start a cooking program in
the other oven when using Self Clean.
Cleaning and care

Preparing for the Self Clean program

The high temperatures used during
self cleaning will damage
accessories that are not designed for
cleaning in the Self Clean program.
Please remove these accessories
from the oven before starting the Self
Clean program. This also applies to
accessories purchased separately.
The following accessories are suitable
for cleaning during the Self Clean
program and can remain in the oven:
– Shelf runners,
– FlexiClips with wire rack
HFCBBR 30-2,
– Wire oven rack HBBR 30-2.
 Take all accessories that are not "Self
Clean safe" out of the oven.
 Place the wire oven rack on the top
shelf level.
If not removed, coarse soiling can
smoke and cause the Self Clean
program to turn itself off.
 Remove any coarse soiling before
running the Self Clean program.
149