Table of Contents
Advertisement
ASSEmBlINg ThE BlENDEr
Put pitcher (or culinary jar) assembly
6
onto the Blender base.
Before using the Blender, plug into a
8
grounded outlet, and press POWER
(
)
. The Power indicator light will flash
when ready.
10
W10579680A_ENv8.indd 10
Put lid on pitcher (or culinary jar).
7
gap
NOTE: If there is a gap between the locking
collar and the base, the pitcher (or culinary
jar) might not be locked into the locking
collar or the assembly may not be positioned
properly on the Blender base. If necessary,
repeat steps 1 through 4.
After blending, always press the POWER
9
(
)
button
(the POWER indicator
light should be shut off) and unplug the
power cord before removing the pitcher
(or culinary jar) assembly from the base.
OP
8/13/13 10:17 AM
Advertisement
Table of Contents
