Table of Contents
Advertisement
Direct Keypad Dialling
You can also enter a full number with the number keys and then press
the START/MEMORY key to begin dialling. You can use this
method to dial a full number when you don't need to speak to the
other party before faxing.
Note: Direct Keypad Dialling cannot be used to dial a number within the
same PBX as your fax machine. To send a document to a fax machine in
your PBX, use Normal Dialling.
1
Load the document(s).
The display will show:
READY TO SEND
• •
Set the resolution and/or contrast if
desired.
2
Enter the number of the receiving
machine by pressing the numeric keys.
• •
If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL key. The pause will
appear as a hyphen. Several pauses
can be entered in a row.
3
Check the display. If the number of the
receiving machine shown is correct,
press the START/MEMORY key.
• •
If it is not correct, press the STOP
key to backspace and clear one digit
at a time, and then re-enter the
correct digit(s).
Sending a Fax by Automatic Dialing
RESOLUTION
ABC
2
1
JKL
GHI
4
5
TUV
PQRS
7
8
START/MEMORY
DEF
3
MNO
6
WXYZ
9
45
Advertisement
Table of Contents
