Page 1
ASSEMBLY AND SAFETY GUIDE. Stand and Go Walker MDS86410SGB...
Page 2
What’s Included: 2 Front legs with wheels 2 Handles with handgrips 2 Back legs without wheels 2 Triangular knobs Walker frame 2 MEDLINE | MDS86410SGB (Rev: 03-07-19)
Page 3
DO NOT use your walker if you have any handicaps or disabilities or using medications etc that would impair of interfere with safe usage of this product. Failure to follow the above instructions may result in serious injury. 1-800-MEDLINE (633-5463) | medline.com 3...
Page 4
Remove the walker components from shipping carton. Then, in an upright position, unfold the walker frame and place on its side. IMPORTANT NOTE: Proceed with caution when assembling as there are areas around the moving parts that could potentially pinch fingers. 4 MEDLINE | MDS86410SGB (Rev: 03-07-19)
Page 5
Repeat with the other front leg and make sure the push button is engaged. Insert the back leg (without wheel) into the frame of the walker. Repeat with the other back leg. Ensure both legs are locked in place before use. 1-800-MEDLINE (633-5463) | medline.com 5...
Page 6
Slide up or down to adjust to base of the walker frame. your height preference, then insert the 3 point knob into the walker and tighten. Repeat with the other handle. Ensure both hand rests/grips are tightened before use. 6 MEDLINE | MDS86410SGB (Rev: 03-07-19)
Page 7
Pull the unit around the body & use the hand grips & balls to help you stand straight up. GREEN Lift up on the handles lightly. The walker handles will rise to walking height. Make sure the locks show green to indicate they are locked into walking position. 1-800-MEDLINE (633-5463) | medline.com 7...
Need help?
Do you have a question about the MDS86410SGB and is the answer not in the manual?
Questions and answers