Recording Paper - Panasonic KX-FT982HK Operating Instructions Manual

1. Installation and Quick Start

1.4 Recording paper

A
Open the top cover by pressing the top cover release
button (1).
B
Install the recording paper.
Correct
Incorrect
C
Insert the leading edge of the paper into the opening
above the thermal head (1).
D
Pull the paper out of the unit.
L Make sure that there is no slack in the paper roll.
4
E
1
F
1
Note:
L If the paper is secured with glue or tape, cut
L When the power cord is connected, a message is
L For accessory information, see page 3.
Close the top cover securely by pushing down on
both sides.
For KX-FT982:
Press {FAX/START}, then tear off the excess paper
by pulling it towards you.
{FAX/START}
For KX-FT984:
Press {FAX/START} to cut the paper.
{FAX/START}
approximately 15 cm from the beginning of the roll
before installing it.
printed each time the top cover is opened then
closed. If the recording paper is installed upside
down, the message will not be printed. Install the
paper correctly.