For cameras compatible with the standard slide rail
NTSC regions
AJ-SPX800, AJ-SDX900, AJ-SDC905, AJ-SDC615
Mounting the Viewfinder
1.
Confirm that the POWER switch of the camera is "OFF".
2.
Insert the plug into the connection jack of the viewfinder.
<Note>
Be sure to insert the plug all the way into the connection jack.
3.
Loosen the viewfinder left-right position anchoring ring.
4.
While pulling up the viewfinder stopper, attach the viewfinder by sliding it in the
direction of the arrow.
Viewfinder stopper
5.
Tighten the viewfinder left-right position anchoring ring.
Camera model number
PAL regions
AJ-SPX800, AJ-SPX900, AJ-SDX900, AJ-D908,
AJ-SDC905, AJ-D913, AJ-SDC615, AJ-D615
Loosen the ring.
7 (E)