Alpine i209-WRA Installation Manual page 2

For jeep wrangler 2011-2018
Table of Contents

Advertisement

Types of Precautions
Indicates actions that are forbidden
(must not be performed)
Forbidden
Indicates that disassembly is
forbidden.
Forbidden
Do not disassemble or modify the product. Doing so could lead to an accident, fire,
or electric shock.
Store screws and other small objects where small children cannot reach them. If one of these
small objects is swallowed, consult with a doctor immediately.
When replacing fuses, be sure to use fuses with the specified current rating. Failing to do so could
lead to an accident or fire.
Only connect the product to a 12 VDC negative ground car. Failing to do so could lead to
an accident or fire.
Before you begin wiring, remove the ground wire from the negative terminal of the battery.
Failing to do so could lead to electric shock or injury.
Do not cut the insulation on a cord and take power from another device. Doing so could
lead to fire or electric shock.
Do not install the product in a location where it will obstruct the driver's forward view;
interfere with the operation of the steering wheel, gearshift, or the like; or pose a
threat to passengers. Doing so could lead to an accident or injury.
When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank,
electrical wiring, and the like. This kind of damage could lead to an accident or fire.
WRANGLER
Indicates actions that are
mandatory (must be performed)
Mandatory
Marks content that should receive
your full attention.
Warning
Jeep Wrangler
˜ 2/22
Forbidden
Forbidden Mandatory
Mandatory
Forbidden
Forbidden

Advertisement

Table of Contents
loading

This manual is also suitable for:

I209-wrasxm

Table of Contents