Feet And Casters; Filter Box - Grizzly G0534 Instruction Manual

Feet and Casters

Components and Hardware Needed:
Motor Cabinet ....................................................1
Cabinet Feet ......................................................2
Casters ..............................................................2
Hex Bolts 1 ⁄ "-20 x 5 ⁄ " ......................................16
4 8
1
Flat Washers ⁄ " ..............................................32
4
Hex Nuts 1 ⁄ " ....................................................16
4
Tools Needed:
10mm Wrench or Socket....................................2
To mount the feet and casters:
Lay the motor cabinet on its back.
1.
2. Attach both cabinet feet to the bottom front of
the motor cabinet with 8 hex bolts, 16 flat
washers and 8 hex nuts.
3. Attach both casters to the bottom rear of the
motor cabinet with 8 hex bolts, 16 flat wash-
ers and 8 hex nuts. (See assembly in Figure
11.)
Figure 11. Casters and feet installed on
motor cabinet.
4. Turn the motor cabinet to its upright position
on the feet and casters.
G0534/G0535 Downdraft Tables
Qty Components and Hardware Needed:
Rear Filter Wall ..................................................1
Side Filter Walls ................................................2
Lower Front Filter Wall ......................................1
Hex Bolts
Flat Washers
Hex Nuts
Tools Needed:
10mm Wrench or Socket....................................2
To assemble the filter box:
Attach the rear filter wall to the base with 3
1.
hex bolts and 3 flat washers (see Figure 12).
Figure 12.
2. Attach both side filter walls to the base with 6
hex bolts and 6 flat washers.

Filter Box

1 ⁄ "-20 x 5 ⁄ " ......................................16
4 8
1
⁄ " ..............................................20
4
1 ⁄ " ......................................................4
4
Rear filter wall installed on motor
cabinet.
Qty
-13-