Airbag Readiness Light - Chevrolet 2008 Corvette Owner's Manual

Airbag Readiness Light

There is an airbag readiness light on the instrument panel
cluster, which shows the airbag symbol. The system
checks the airbag's electrical system for malfunctions.
The light tells you if there is an electrical problem.
The system check includes the airbag sensor, the
pretensioners, the airbag modules, the wiring and
the crash sensing and diagnostic module. For more
information on the airbag system, see Airbag System
on page 1-44.
If the airbag readiness light stays on after you start
the vehicle or comes on when you are driving,
your airbag system may not work properly.
Have your vehicle serviced right away.
This light will come on
when you start your
vehicle, and it will flash for
a few seconds. The light
should go out and the
system is ready.
CAUTION:
{
If the airbag readiness light stays on after you
start your vehicle, it means the airbag system
may not be working properly. The airbags in
your vehicle may not inflate in a crash, or they
could even inflate without a crash. To help
avoid injury to yourself or others, have your
vehicle serviced right away if the airbag
readiness light stays on after you start
your vehicle.
The airbag readiness light should flash for a few seconds
when you start the engine. If the light does not come on
then, have it fixed immediately. If there is a problem
with the airbag system, an airbag Driver Information
Center (DIC) message may also come on. See DIC
Warnings and Messages on page 3-55 for more
information.
3-35