Engine Coolant - Chevrolet 2008 Corvette Owner's Manual

When to Check and What to Use
Refer to the Maintenance Schedule to determine how
often you should check the fluid level in your clutch
master cylinder reservoir and for the proper fluid to use.
See Owner Checks and Services on page 6-8 and
Recommended Fluids and Lubricants on page 6-11.
How to Check and Add Fluid
Make sure the fluid level is at the MIN (Minimum) line
on the side of the reservoir. If it is not, remove the
cap and add the proper fluid until the level reaches the
MIN line.
5-28
The hydraulic clutch fluid
reservoir cap has this
symbol on it. See Engine
Compartment Overview
on page 5-14 for reservoir
location.

Engine Coolant

The cooling system in your vehicle is filled with
®
DEX-COOL engine coolant. This coolant is designed
to remain in your vehicle for five years or 150,000 miles
(240 000 km), whichever occurs first, if you add only
®
DEX-COOL extended life coolant.
The following explains your cooling system and how to
add coolant when it is low. If you have a problem
with engine overheating, see Engine Overheating on
page 5-31.
A 50/50 mixture of clean, drinkable water and
®
DEX-COOL coolant will:
Give freezing protection down to −34°F (−37°C).
•
•
Give boiling protection up to 265°F (129°C).
•
Protect against rust and corrosion.
•
Help keep the proper engine temperature.
•
Let the warning lights and gages work as they
should.
Notice: Using coolant other than DEX-COOL
cause premature engine, heater core, or radiator
corrosion. In addition, the engine coolant may
require changing sooner, at the first maintenance
service after each 30,000 miles (50 000 km) or
24 months, whichever occurs first. Any repairs
would not be covered by your warranty. Always use
®
DEX-COOL (silicate-free) coolant in your vehicle.
®
may