Chevrolet 2008 Corvette Owner's Manual page 71

Chevrolet 2008 corvette automobile owner's manual
Hide thumbs Also See for 2008 Corvette:
Table of Contents

Advertisement

7. Place the new, unrecognized transmitter in the
glove box transmitter pocket with the buttons
facing towards the passenger's side.
8. Once the transmitter is programmed, a beep will
sound. The DIC will display READY FOR #X, where
X can be 3 or 4, or MAXIMUM NUMBER OF FOBS
LEARNED.
9. Press the Acc. button (ignition switch).
The Canadian immobilizer standard requires Canadian
owners to see their dealer/retailer for matching new
transmitters when two recognized transmitters are not
available. United States owners are permitted to match a
new transmitter to their vehicle when a recognized
transmitter is not available. The procedure will require
three ten minutes cycles to complete the matching
process.
1. The vehicle must be off.
2. Place the new, unrecognized transmitter in the
glove box transmitter pocket with the buttons
facing towards the passenger side.
2-7

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF