Replacement Bulbs; Windshield Replacement; Windshield Wiper Blade Replacement - Chevrolet 2008 Corvette Owner's Manual

4. Pull the bulb straight out to remove it from the
socket.
5. Push the new bulb in the bulb socket until it snaps
into place.
6. Reinstall the lamp assembly by first lining up the
tabs on the bottom of the lamp assembly with the
tabs in the vehicle, then slide it in.
7. Replace the screw at the top of the lamp assembly.

Replacement Bulbs

Exterior Lamp
Front Parking/Turn Signal/
Daytime Running Lamp (DRL)
Headlamp, High-Beam Lamp
Sidemarker Lamp
Stoplamp/Taillamp/Turn
Signal Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.

Windshield Replacement

Your windshield is part of the Head-Up Display (HUD)
system. If you ever have to get your windshield
replaced, get one that is designed for HUD or your HUD
image may look out of focus.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for wear
and cracking. See Scheduled Maintenance on page 6-4
for more information.
Bulb Number
Replacement blades come in different types and are
5702KA
removed in different ways. For the proper type and
H9
length, see Maintenance Replacement Parts on
page 6-13.
W3W
It is a good idea to clean or replace the wiper blade
3057KX
assembly every six months.
Allowing the wiper blade arm to touch the windshield
when no wiper blade is installed could damage the
windshield. Any damage that occurs would not
be covered by your warranty. Do not allow the wiper
blade arm to touch the windshield.
5-55