Table of Contents
Advertisement
Setting Bake Time
Use bake time to set the amount of time needed for baking.
The oven will turn on immediately and stop automatically
after the set bake time ends.
To program oven to bake with oven default temperature
of 350°F and to shut-off after 30 minutes:
1. Press Bake Time.
2. Enter 3 0 using numeric keypad.
3. Press START to accept.
4. Press Bake.
5. Press START.
When the programmed Bake Time ends:
End will appear in the display window, and the oven will
shut-off automatically
(Figure
beep three times every 30 seconds as a reminder until OFF
is pressed.
Figure 24: Display showing End
Important note:
•
The Bake Time feature may be set with Bake, convec-
tion bake, and convection roast. Bake Time or Delay
Start will not operate with the broil function.
•
The maximum bake time setting is 5 hours and 59
minutes unless oven is set for continuous cooking.
To change the oven temperature or bake time after bak-
ing has started:
1. Press Bake (for oven temperature) or Bake Time.
2. Press numeric keys to enter new temperature or bake
time.
3. Press START to accept change.
CAUTION
Always use pot holders or oven mitts when using the
oven. When cooking the oven interior, oven racks, and
cooktop will become very hot which can cause burns.
24). The oven control will
SETTING OVEN CONTROLS
Setting Delay Start
Delay Start sets a delayed starting time to oven cooking or
cleaning functions. Prior to setting a delay start, be sure the
time of day is set correctly.
WARNING
Food Poisoning Hazard. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
To program oven for a delay start beginning at 5:30, to
shut-off automatically after 50 minutes and for baking
at 375°F:
1. Press Bake Time.
2. Enter 5 0 using numeric keypad until 5 0 appears in the
display.
3. Press START to accept.
4. Press Delay Start.
5. Enter 5 3 0 using numeric keypad until 5 3 0 appears in
the display.
6. Press START to accept.
7. Press Bake.
8. Enter 3 7 5 using numeric keypad.
9. Press START.
When the programmed bake time ends:
End will appear in the display window, and the oven will
shut off automatically. The oven control will beep three
times every 30 seconds as a reminder until the OFF key is
pressed.
Important note:
Delay start may be set using a 24 hr clock. To set clock for
24 Hr operation, See
"Setting 12 Hour or 24 Hour display
mode"
on
page 21
for more information. The Delay Start
feature may be used with Convection Bake, Convection
Roast, Convection Convert, Bake, Slow Cook, and Self
Clean functions. Delay Start or Bake Time will not operate
with the broil function.
27
Advertisement
Table of Contents
