Select The Recall Duration; Dial Mode; Auto Clock; Register Additional Handsets - Philips D1502B/63 Extended User Documentation

Select the recall duration

Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[SHORT], [MEDIUM] and [LONG]. The
number of available options varies with different
countries. For details, consult your service
provider.
1
Press MENU/OK.
2
Select [SERVICES] > [RECALL TIME],
then press MENU/OK to confirm.
3
Select an option, then press MENU/OK to
confirm.
» The setting is saved.

Dial mode

Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Press MENU/OK.
2
Select [SERVICES] > [DIAL MODE], then
press MENU/OK to confirm.
3
Select a dial mode, then press MENU/OK
to confirm.
» The setting is saved.
Note
•
If your phone is in pulse dial mode, press
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.

Auto clock

•
•
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
2
3

Register additional handsets

You can register additional handsets to the base
station. The base station can register up to 4
handsets.
1
2
3
4
•
during a
•
Note
This service is network dependent.
Make sure you have subscribed to the caller ID service
before you use this feature.
Press MENU/OK.
Select [SERVICES] > [AUTO CLOCK],
then press MENU/OK to confirm.
Select [ON]/[OFF], then press MENU/OK.
» The setting is saved.
Press and hold on the base station for
5 seconds.
Press MENU/OK on the handset.
Select [SERVICES] > [REGISTER], then
press MENU/OK to confirm.
Enter the system PIN. Press REDIAL/C to
make corrections. Then press MENU/OK
to confirm the PIN.
» Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
The preset PIN is 0000. No change can be made on it.
EN 23