License Plate Lamp
To replace one of these bulbs, do the following:
1. Remove the two screws holding each of
the license plate lamps to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
334
3. Turn the bulb socket counterclockwise and
pull the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
license plate lamp.
Replacement Bulbs
Exterior Lamp
Back-up Lamp and CHMSL
Front Turn Signal and
Parking Lamp
Headlamp High/Low-Beam
Stoplamp/Taillamp/Turn Signal
For replacement bulbs not listed here, contact
your dealer.
Bulb Number
921
3157KX
H13
3057KX