Table of Contents
Advertisement
Operating the appliance
en
Start the programme.
7.
Remove the fabrics and switch off
8.
the dryer.
Setting a programme
If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a programme, see
~ Page 21.
Select the required programme;
1.
detailed information on the
programmes can be found from
~ Page 19 onwards.
Use the programme selector to set
2.
the required programme. The default
programme settings for the selected
programme appear in the display
panel.
Default programme settings
Note:
are standard settings that are
already defined when a programme
is selected. After selecting a
programme, you can see the default
programme settings in the display
panel.
If required, adjust the default
3.
programme settings. You can find
detailed information on this from
~ Page 19 onwards.
Starting the programme
Press the Start button.
If you want to lock the
Note:
programme to prevent it from being
adjusted inadvertently, you can select
the childproof lock, see ~ Page 21.
24
Programme sequence
The programme status is indicated in
the display field.
e.g.
Expected programme duration
in hours and minutes.
1:27
When a programme is
Note:
selected, the expected drying
time for the recommended load
is displayed. During drying
moisture sensors detect the
remaining moisture in the load
and adjust the programme
length (except timed
programmes). This is visible via
the time remaining leaping
forward.
Dry
e
Iron Dry
Ø
Cupboard Dry
»
AntiCrease
Ý
Pause
- ˜ -
End
"Ÿš
Changing the programme or
adding laundry
You can remove or add laundry and
change or alter the programme at any
time during drying.
To pause the programme, open the
1.
dryer door or press the Start button.
Add or remove laundry.
2.
Select another programme or an
3.
additional function, if required.
Close the dryer door.
4.
Press the Start button.
5.
The programme duration in the
Note:
display panel is updated depending on
the load and residual moisture in the
laundry. The values displayed may
change after the programme is
changed or the load is adapted.
Advertisement
Table of Contents
